{"id":168,"date":"2026-06-11T08:55:35","date_gmt":"2026-06-11T08:55:35","guid":{"rendered":"https:\/\/planetary-gearboxes.cn\/?p=168"},"modified":"2026-06-11T08:55:35","modified_gmt":"2026-06-11T08:55:35","slug":"planetary-gearbox-for-packaging-machinery","status":"publish","type":"post","link":"https:\/\/planetary-gearboxes.cn\/ko\/planetary-gearbox-for-packaging-machinery\/","title":{"rendered":"Planetary Gearbox for Packaging Machinery \u2014 FFS Jaw Drives, Indexing Machines & High-Speed Washdown Applications"},"content":{"rendered":"
\n
\n
\n
600 cycles\/min<\/span><\/div>\n
FFS Jaw Drive Rating<\/div>\n<\/div>\n
\n
IP65<\/div>\n
Every Unit Pressure-Tested<\/div>\n<\/div>\n
\n
\u00b10.01\u00b0<\/div>\n
Index Accuracy \u2014 EP-FAB P0<\/div>\n<\/div>\n
\n
34.2 kN<\/span><\/div>\n
Belt Radial Force \u2014 EP-FAL<\/div>\n<\/div>\n
\n
\u221210\u00b0C<\/div>\n
Min. Operating Temp \u2014 NYOGEL<\/div>\n<\/div>\n
\n
C1\u2013C10<\/div>\n
Universal Motor Adapter<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Engineering Context<\/span><\/p>\n

Why Packaging Machinery Spans the Entire Gearbox Precision Spectrum \u2014 From Food-Grade P0 to Economy P2<\/h2>\n

<\/p>\n

\n
\"EP-FAL<\/p>\n

Korea Ever-Power EP-FAL integrated belt-pulley planetary gearbox \u2014 FFS jaw drive and high-speed conveyor applications. IP65 on every unit; rated for 600 cycles\/min at daily washdown environments.<\/p>\n<\/div>\n

No other industry places as wide a range of gearbox requirements within a single production line as packaging. A form-fill-seal machine may have a jaw drive running at 600 cycles per minute with IP65 washdown and \u22643 arc-min backlash, a film draw roller running at 6,000 rpm input needing low heat generation, a rotary indexing station demanding \u00b10.01\u00b0 positional accuracy, and a carton folding axis where \u22648 arc-min economy-grade precision is perfectly sufficient at 18% lower cost. All on the same machine, all driven by servo motors, all connecting through a planetary gearbox.<\/p>\n

This range \u2014 from food-grade EP-FADS P0 on a liquid filling nozzle axis to EP-FPG P2 on a carton erector \u2014 is exactly what Korea Ever-Power’s eight-series architecture is designed for. The C1\u2013C10 universal motor adapter system means a packaging machine OEM that qualifies a single Yaskawa servo motor model covers every gearbox on the BOM, from the precision filling axis to the economy-tier infeed belt drive. One qualification. One adapter catalogue item. Zero re-engineering when the series changes between drive points on the same machine.<\/p>\n

The IP65 requirement is the second defining characteristic of packaging applications. Daily CIP (clean-in-place) washdown cycles with hot water, caustic cleaning agents, and pressurised spray are the operating environment for food and pharmaceutical packaging lines \u2014 not an exceptional event. A gearbox with a failed IP seal allows cleaning agents into the lubrication chamber. Korea Ever-Power applies pneumatic pressure decay testing to every EP-FAL, EP-FAB, EP-FAD, and EP-FADS unit before shipment \u2014 the same 60-second pressure test on the last unit of the day as on the first. This is not an inspection sampling standard: it is a 100% production test.<\/p>\n

<\/p>\n

\n
\ud83e\uddf4<\/div>\n
\n
The FFS Jaw Drive: 600 Cycles\/Min, IP65, and the Eccentricity Problem<\/div>\n
A form-fill-seal cross-seal jaw drive cycles from open to closed and back 600 times per minute at the maximum rated throughput of a high-speed pouch machine. The jaw drive gearbox must survive daily washdown, maintain IP65 seal integrity under repeated thermal cycling, and deliver backlash \u22643 arc-min to keep jaw registration within the heat-seal tolerance. EP-FAL solves the additional problem of belt hub eccentricity<\/strong>: in conventional FFS jaw drives with a separate belt pulley hub bolted to the gearbox output shaft, hub-to-shaft eccentricity of 0.05\u20130.12 mm generates a periodic jaw registration error at belt rotation frequency. EP-FAL’s integrated pulley eliminates this interface \u2014 pulley bore and gearbox output shaft are the same machined surface, zero eccentricity.<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

<\/div>\n

Packaging Machine Application Map \u2014 Cycle Speed vs. Backlash Grade vs. IP Class<\/h3>\n

The matrix below positions eight common packaging machine drive applications by their two primary selection drivers: cycle speed (x-axis) and required backlash precision (y-axis). IP class and recommended EP-series are shown within each node. Use this map to locate your application and identify the correct series before consulting the detailed specification table.<\/p>\n

<\/p>\n

\n

<\/p>\n

\n

<\/p>\n

Backlash Precision Required \u2192<\/div>\n

<\/p>\n

\n


\n<\/p>\n

\n
P0 \u22641 arc-min<\/div>\n
\n

<\/p>\n

\n
Filling Machine
\nNozzle Axis<\/div>\n
EP-FADS P0<\/div>\n
IP65 \u00b7 NYOGEL<\/div>\n
~30\u201360 cpm<\/div>\n<\/div>\n

<\/p>\n

\n
Rotary Indexing
\nDrive<\/div>\n
EP-FAB P0<\/div>\n
IP65 \u00b7 DIN 5<\/div>\n
~60\u2013200 cpm<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
P1 \u22643 arc-min<\/div>\n
\n

<\/p>\n

\n
Thermoformer
\nStation Drive<\/div>\n
EP-FAB P1<\/div>\n
IP65 \u00b7 -10\u00b0C<\/div>\n
~30\u2013120 cpm<\/div>\n<\/div>\n

<\/p>\n

\n
Labelling
\nCarousel Drive<\/div>\n
EP-FAD P1<\/div>\n
IP65 \u00b7 low noise<\/div>\n
~100\u2013400 cpm<\/div>\n<\/div>\n

<\/p>\n

\n
FFS Film
\nDraw Roller<\/div>\n
EP-FAD P1<\/div>\n
IP65 \u00b7 6,000rpm<\/div>\n
~200\u2013600 cpm<\/div>\n<\/div>\n

<\/p>\n

\n
FFS Cross-Seal
\nJaw Drive \u2605<\/div>\n
EP-FAL P1<\/div>\n
IP65 \u00b7 integrated pulley<\/div>\n
up to 600 cpm<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
P2\/Std \u22645\u20138 arc-min<\/div>\n
\n

<\/p>\n

\n
Carton Erector
\nFolding Axis<\/div>\n
EP-FPG P2<\/div>\n
IP65 \u00b7 economy<\/div>\n
~60\u2013200 cpm<\/div>\n<\/div>\n

<\/p>\n

\n
Case Packer
\nInfeed Belt<\/div>\n
EP-FPG\/FPGA<\/div>\n
IP64 \u00b7 OEM pricing<\/div>\n
~30\u2013120 cpm<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
<\/div>\n
Low speed<\/span>
\n\u2190 Machine Cycle Speed (cycles\/min) \u2192<\/span>
\nHigh speed<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
Series tier:<\/div>\n
EP-FAB\/FADS P0 \u2014 Precision<\/span><\/div>\n
EP-FAD\/FAL\/FAB P1 \u2014 Standard<\/span><\/div>\n
EP-FPG\/FPGA P2\/Std \u2014 Economy<\/span><\/div>\n
\u2605 Highlighted = most common packaging application<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Application Scenarios<\/span><\/p>\n

Six Packaging Machine Applications \u2014 Series, Engineering Rationale, and Critical Specifications<\/h2>\n

The six scenarios below cover the drive types that packaging machine engineers encounter most frequently when specifying planetary gearboxes. They range from the most demanding (high-speed FFS jaw drive with daily CIP washdown) to the most cost-sensitive (economy-tier carton folding and case packing), representing the full width of the packaging machinery gearbox market.<\/p>\n

\n

<\/p>\n

\n
\n
01 \u2014 Form-Fill-Seal Cross-Seal Jaw Drive<\/div>\n
High-speed pouch \/ sachet \/ pillow pack machine<\/div>\n<\/div>\n
\n
EP-FAL P1<\/span>
\nFrame 090\u2013150 mm<\/span>
\n600 cycles\/min<\/span><\/div>\n

The FFS jaw drive runs at the highest acceleration-deceleration duty of any packaging machine axis \u2014 reciprocating from full open to closed and back 600 times per minute, with the jaw force profile generating peak torque at reversal points. The conventional solution uses a gearbox plus a separate belt pulley hub; the hub-to-shaft eccentricity (typically 0.08 mm) generates a periodic jaw registration error at belt rotation frequency that adds to the total heat-seal positioning uncertainty. EP-FAL’s integrated timing belt pulley eliminates this interface: pulley bore and output shaft are the same machined surface, reducing periodic registration error from 0.08 mm to \u22640.015 mm in the same machine design \u2014 the difference between a customer acceptance and a rejection on tight seal tolerance specifications.<\/p>\n

Key spec:<\/strong> F_rad 34,200 N (AT10 jaw belt); IP65 every unit; 5\u201320:1 ratio; 5,000 rpm max input; 30,000 hr S5 design life; NYOGEL 792D for daily CIP washdown with no relubrication interval.<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
02 \u2014 High-Speed Rotary Indexing Drive<\/div>\n
Precision station indexer \u2014 carousels, turntables, dial plates<\/div>\n<\/div>\n
\n
EP-FAB P0<\/span>
\nFrame 090\u2013110 mm<\/span>
\n\u22641 arc-min P0<\/span><\/div>\n

Rotary indexing drives in high-speed packaging machines \u2014 dial-plate stations, carousel bottle conveyors, rotary filling heads \u2014 require \u00b10.01\u00b0 angular repeatability to maintain station-to-station registration. At a carousel radius of 200 mm, 1 arc-min of uncompensated backlash produces 0.058 mm of linear position error \u2014 sufficient to cause bottle misalignment on a 4-lane filling head or label placement offset on a rotary labeller. EP-FAB P0, with individual backlash grade stamped on every unit at \u22641 arc-min, is the standard specification for these drives. The high fatigue life of the DIN Class 5 profile-ground gears sustains \u00b10.01\u00b0 accuracy over 30-million-cycle production runs between maintenance intervals.<\/p>\n

Key spec:<\/strong> \u22641 arc-min P0 individual stamp; 5\u201320:1 ratio; 4,000 rpm max input; IP65; 20,000 hr S5 life; DIN Class 5 profile-ground ring gear \u2014 same standard as European premium brands.<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
03 \u2014 Liquid Filling Machine Nozzle Axis<\/div>\n
Food-grade precision fill volume control<\/div>\n<\/div>\n
\n
EP-FADS P0<\/span>
\nFrame 047\u2013060 mm<\/span>
\nFood-grade NYOGEL<\/span><\/div>\n

Liquid filling machine nozzle axes require P0 precision for repeatable fill volume: the nozzle valve position at the moment of cut-off determines fill weight deviation, and backlash in the valve actuator drive directly adds to fill weight variation. Food and pharmaceutical regulations require that lubricant is contained \u2014 no external grease points, no relubrication intervals, and no lubricant egress onto the product contact surface. EP-FADS P0 with NYOGEL 792D sealed lifetime fill satisfies all three requirements: the motor shaft inserts directly into the gearbox (no external adapter plate that could trap contamination), NYOGEL 792D is contained within the sealed housing, and the compact 047\u2013060 mm frame fits within the tight envelope of a rotary filling head.<\/p>\n

Key spec:<\/strong> NYOGEL 792D sealed lifetime fill \u2014 no external grease points; \u22641 arc-min P0; direct-insert motor (no adapter plate contamination trap); IP65; 6,000 rpm max input; 30,000 hr design life.<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
04 \u2014 Thermoformer Forming Station Drive<\/div>\n
Sheet forming indexer \u2014 cold-chain packaging lines<\/div>\n<\/div>\n
\n
EP-FAB P1<\/span>
\nFrame 090\u2013110 mm<\/span>
\n\u221210\u00b0C to +90\u00b0C<\/span><\/div>\n

Thermoformers for cold-chain and chilled food packaging operate in environments where forming station temperatures cycle between ambient and chilled film temperatures, and the machine may be in a refrigerated production hall at below 0\u00b0C ambient. The gearbox must maintain seal integrity and lubrication performance across this temperature range. EP-FAB P1 with NYOGEL 792D is rated for continuous operation down to \u221210\u00b0C \u2014 the lowest rated temperature among the EP-series for cold-chain packaging environments. IP65 is standard: forming station wash cycles use high-pressure hot water that would rapidly ingress a batch-sample-tested IP seal.<\/p>\n

Key spec:<\/strong> NYOGEL 792D rated \u221210\u00b0C minimum; IP65 every unit; \u22643 arc-min P1; 10\u201330:1 ratio; 4,000 rpm input; 20,000 hr S5 life for forming station high-cycle duty.<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
05 \u2014 Labelling Machine Carousel \/ Turret Drive<\/div>\n
Container rotation \u2014 wet-glue, self-adhesive, sleeve labellers<\/div>\n<\/div>\n
\n
EP-FAD P1<\/span>
\nFrame 060\u2013090 mm<\/span>
\n\u226456 dB noise<\/span><\/div>\n

Labelling machine carousels and turret drives operate at 100\u2013400 container rotations per minute with smooth, vibration-free motion \u2014 vibration in the container drive produces label placement error and wrinkle in self-adhesive sleeves. EP-FAD P1 with helical planet gears delivers the lowest vibration level in this frame size range among Korea Ever-Power’s standard production: helical meshing geometry generates approximately 60% lower vibration amplitude than straight-cut gear designs at equivalent pitch-line velocity. Low noise (\u226456 dB at FAD060) satisfies production hall noise requirements without acoustic enclosures around the labelling head.<\/p>\n

Key spec:<\/strong> \u226456 dB at rated speed; \u22643 arc-min P1; 5\u201316:1 ratio; 6,000 rpm max input; IP65 washdown; 30,000 hr design life; NYOGEL 792D compatible with food\/pharma cleanroom-adjacent environments.<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
06 \u2014 Carton Erector \/ Case Packer Economy Drives<\/div>\n
Folding cams, infeed belts \u2014 secondary packaging OEM<\/div>\n<\/div>\n
\n
EP-FPG P2 \/ FPGA<\/span>
\nFrame 040\u2013090 mm<\/span>
\n\u22645\u20138 arc-min<\/span><\/div>\n

Carton erectors, carton folders, and case packer infeed belts operate in secondary packaging environments where \u22648 arc-min (economy-grade) backlash is fully adequate for the motion requirements, and where production volumes of 50\u2013500 units per machine BOM make unit cost a significant factor. EP-FPG P2 (\u22645 arc-min) and EP-FPGA standard grade (\u22648 arc-min) deliver closed-loop position control accuracy at 35\u201350% lower cost than EP-FAB at the same frame size. The FPGA square housing mounts flat against carton erector frame faces without an adapter bracket \u2014 the same simplification that makes it effective in conveyor automation.<\/p>\n

Key spec:<\/strong> Economy tier pricing; IP65 option (carton erectors with wash duties); 10\u201350:1 ratio; 3,000 rpm input; 20,000 hr S5 life; C1\u2013C10 universal adapter for same motor as precision axes on the same line.<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

Technical Specifications<\/span><\/p>\n

EP-Series Packaging Application Specification \u2014 Complete Drive Point Matrix<\/h2>\n

The table below provides the full specification for every major packaging machine drive type covered in this article. Use it as the starting point for your BOM before requesting datasheets and application engineering support from Korea Ever-Power. The C1\u2013C10 motor adapter column confirms that a single motor qualification covers the entire machine BOM regardless of which series is specified at each drive point.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
Drive Point \/ Machine Type<\/th>\n\uc2dc\ub9ac\uc988<\/th>\nFrame
\n(mm)<\/th>\n		Backlash<\/th>\nRatio<\/th>\nMax
\nrpm<\/th>\n		IP<\/th>\n\uc218\uba85(\uc2dc\uac04)<\/th>\nKey Reason for Selection<\/th>\n<\/tr>\n<\/thead>\n
FFS jaw drive (cross-seal)<\/td>\n\u2605<\/span> EP-FAL P1<\/td>\n090\u2013150<\/td>\n\u22643 arc-min<\/td>\n5\u201320:1<\/td>\n5,000<\/td>\nIP65<\/span><\/td>\n30,000*<\/td>\nIntegrated belt pulley; 600 cpm; 0.08\u21920.015 mm periodic error reduction; F_rad 34,200 N<\/td>\n<\/tr>\n
FFS film draw roller<\/td>\nEP-FAD P1<\/td>\n060\u2013090<\/td>\n\u22643 arc-min<\/td>\n5\u201316:1<\/td>\n6,000<\/td>\nIP65<\/span><\/td>\n30,000<\/td>\nHigh-speed film pull; low heat generation; NYOGEL 792D; 30,000 hr continuous duty<\/td>\n<\/tr>\n
Rotary indexing drive<\/td>\nEP-FAB P0<\/td>\n090\u2013110<\/td>\n\u22641 \uc544\ud06c\ubd84<\/td>\n5\u201320:1<\/td>\n4,000<\/td>\nIP65<\/span><\/td>\n20,000<\/td>\n\u00b10.01\u00b0 repeatability; 30M cycle fatigue life; DIN Class 5; individual grade stamp<\/td>\n<\/tr>\n
Filling machine nozzle axis<\/td>\n\u2605<\/span> EP-FADS P0<\/td>\n047\u2013060<\/td>\n\u22641 \uc544\ud06c\ubd84<\/td>\n5\u201310:1<\/td>\n6,000<\/td>\nIP65<\/span><\/td>\n30,000<\/td>\nFood-grade: NYOGEL 792D, no external grease; direct-insert motor; compact envelope<\/td>\n<\/tr>\n
Thermoformer station drive<\/td>\nEP-FAB P1<\/td>\n090\u2013110<\/td>\n\u22643 arc-min<\/td>\n10\u201330:1<\/td>\n4,000<\/td>\nIP65<\/span><\/td>\n20,000<\/td>\nNYOGEL rated \u221210\u00b0C; IP65 for daily hot-water wash; high-cycle forming duty<\/td>\n<\/tr>\n
Labelling machine carousel<\/td>\nEP-FAD P1<\/td>\n060\u2013090<\/td>\n\u22643 arc-min<\/td>\n5\u201316:1<\/td>\n6,000<\/td>\nIP65<\/span><\/td>\n30,000<\/td>\nLow noise \u226456 dB; low vibration; cleanroom-compatible; washdown IP65<\/td>\n<\/tr>\n
Carton erector \/ folding cam<\/td>\nEP-FPG P2<\/td>\n060\u2013090<\/td>\n\u22645 arc-min<\/td>\n10\u201330:1<\/td>\n3,000<\/td>\nIP65 opt<\/td>\n20,000*<\/td>\nEconomy tier; 600 Nm torque; IP65 option for washdown; long maintenance interval<\/td>\n<\/tr>\n
Case packer infeed \/ outfeed belt<\/td>\nEP-FPG\/FPGA<\/td>\n040\u2013090<\/td>\n\u22648 arc-min<\/td>\n10\u201350:1<\/td>\n3,000<\/td>\nIP64<\/td>\n20,000*<\/td>\nCost-optimised; round housing for roller integration; same C1\u2013C10 adapter as precision axes<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u2605 FAL\/FPG: life at S5 intermittent; S1 continuous = 15,000 hr (FAL) \/ 10,000 hr (FPG). FAD\/FADS\/FAB values are S1 continuous. C1\u2013C10 motor adapter applies to all series from FPG to FAB.<\/p>\n

<\/p>\n

\n
\n
\n
FAL 600 cpm<\/div>\n
Jaw Drive Integrated Pulley<\/div>\n<\/div>\n
\n
FADS P0<\/div>\n
Food-Grade Filling Axis<\/div>\n<\/div>\n
\n
IP65 Every Unit<\/div>\n
100% Pressure Tested<\/div>\n<\/div>\n
\n
\u221210\u00b0C \/ +90\u00b0C<\/div>\n
NYOGEL Temp Range<\/div>\n<\/div>\n
\n
C1\u2013C10<\/div>\n
One BOM, All Series<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

\uc5d4\uc9c0\ub2c8\uc5b4\ub9c1 \uc778\uc0ac\uc774\ud2b8<\/span><\/p>\n

Inside the EP-FAL \u2014 Why an Integrated Belt Pulley Changes Jaw Drive Performance<\/h2>\n

<\/p>\n

\n
\"EP-FAL
\n<\/p>\n
\n
\n
0.08\u2192<\/div>\n
0.015mm<\/div>\n
Periodic Error<\/div>\n<\/div>\n
\n
34.2kN<\/div>\n
Max Belt Force<\/div>\n<\/div>\n
\n
IP65<\/div>\n
Every Unit<\/div>\n<\/div>\n<\/div>\n

The EP-FAL integrated pulley is machined from the same forging as the output shaft \u2014 not a separately machined hub pressed or keyed onto the shaft. There is no tolerance accumulation between the gear centreline and the belt pitch circle.<\/p>\n<\/div>\n

<\/p>\n

Four EP-FAL Design Features That Matter for Packaging<\/h3>\n

Packaging machine builders have used conventional gearbox-plus-pulley-hub arrangements for decades because the alternative \u2014 a purpose-built integrated pulley gearbox \u2014 has not been available in a standard production item at competitive pricing. EP-FAL changes that equation. Four internal design features explain why:<\/p>\n

    \n
  1. 01<\/span>\n
    Integrated Timing Belt Pulley \u2014 Zero Hub-Shaft Eccentricity<\/strong><\/p>\n

    In a standard gearbox-plus-hub arrangement, the belt pulley is a separate component clamped or keyed onto the output shaft. The manufacturing tolerance between the hub bore and the shaft OD (typically h6\/H7 fit) produces a concentricity error of 0.03\u20130.05 mm. The keyway adds a further angular offset. Total hub-to-shaft TIR of 0.05\u20130.12 mm appears as a periodic positional error at belt rotation frequency \u2014 in a 600 cycles\/min FFS jaw drive, this is a 600 Hz error signal that the servo controller cannot fully compensate. EP-FAL’s integrated pulley machined from the same component as the output shaft has zero additional concentricity \u2014 the gear output axis and the belt pitch circle share the same centreline by design, not by tolerance. Documented result: periodic jaw registration error reduced from 0.08 mm to \u22640.015 mm in direct machine substitution tests.<\/p>\n<\/div>\n<\/li>\n

  2. 02<\/span>\n
    Oversized Output Bearing for Belt Radial Load \u2014 F_rad to 34,200 N<\/strong><\/p>\n

    A standard planetary gearbox output bearing is sized for torque transmission, not for sustained radial belt loads. When a separate pulley is added to a standard gearbox output shaft, the belt tension force creates a bending moment at the output bearing that exceeds its design load \u2014 reducing bearing life by a factor of 2\u20135\u00d7 depending on belt tension and shaft overhang length. EP-FAL specifies an oversized output bearing as part of the standard design, rated for maximum radial force of 34,200 N at the frame sizes relevant to FFS jaw drives. No external support bearing is needed.<\/p>\n<\/div>\n<\/li>\n

  3. 03<\/span>\n
    NYOGEL 792D Sealed Lifetime Fill \u2014 No Washdown Relubrication<\/strong><\/p>\n

    NYOGEL 792D synthetic grease is rated for \u221210\u00b0C to +90\u00b0C continuous operation and is contained within the sealed housing \u2014 no external lubrication points, no grease nipples. In a packaging machine subjected to daily CIP washdown cycles, the absence of lubrication maintenance points eliminates two risks: the risk of washdown water entering the gearbox through a grease fitting, and the risk of lubricant egress onto the product contact area during a relubrication event. The sealed lifetime design covers the full 30,000-hour S5 design life without any scheduled lubrication service.<\/p>\n<\/div>\n<\/li>\n

  4. 04<\/span>\n
    IP65 Pneumatic Pressure Decay \u2014 Every Unit, Not Batch Sample<\/strong><\/p>\n

    Every EP-FAL unit undergoes a 60-second pneumatic pressure decay test at all dynamic seal interfaces before shipment. This test identifies any IP seal that would fail under the first production washdown cycle \u2014 a failure mode that batch-sample testing cannot reliably detect across a production lot. For packaging machine builders supplying to food and pharmaceutical customers, the difference between “IP65 tested” and “IP65 every unit tested” is the difference between a supplier qualification that passes the customer’s incoming inspection criteria and one that requires a corrective action report after the first field failure.<\/p>\n<\/div>\n<\/li>\n<\/ol>\n

    The combined effect of these four features \u2014 zero eccentricity, oversized bearing, sealed NYOGEL fill, and 100% IP65 testing \u2014 is that the EP-FAL replaces not just the gearbox in a jaw drive design, but the entire gearbox-plus-hub-plus-external-support-bearing sub-assembly, reducing the drive assembly parts count from four components to one.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n
    \n

    Selection Guide<\/span><\/p>\n

    Packaging Gearbox Selection Matrix \u2014 5 Questions from Machine Type to Correct Series<\/h2>\n

    Packaging machinery covers the widest range of gearbox grades of any single industry \u2014 from P0 food-grade precision to economy P2 for secondary packaging automation. This five-question matrix walks from drive type through IP requirement to the correct series and grade. For machines with multiple drive points at different precision levels, work through the matrix independently for each axis.<\/p>\n

    \n
    \n
    Selection Question<\/div>\n
    Your Answer \u2192 Series Implication<\/div>\n
    Recommended<\/div>\n<\/div>\n
    \n
    Q1 \u2014 Drive output type?<\/div>\n
    Belt drive (jaw, conveyor, film pull) \u2192 FAL (inline) or FALR (right-angle) for integrated pulley \u00a0|\u00a0 Direct flange\/shaft coupling \u2192 FAB \/ FAD \/ FADS \/ FPG based on precision \u00a0|\u00a0 Right-angle non-belt \u2192 FABR \/ FADR \u00a0|\u00a0 Economy flat-mount \u2192 FPGA<\/div>\n
    FAL \/ FAB \/ FPG<\/div>\n<\/div>\n
    \n
    Q2 \u2014 Backlash required?<\/div>\n
    \u22641 arc-min (filling nozzle, precision indexer, food-grade precision) \u2192 P0 grade (FAB P0, FADS P0) \u00a0|\u00a0 \u22643 arc-min (FFS jaw, film draw, thermoformer, labeller) \u2192 P1 grade \u00a0|\u00a0 \u22645 arc-min (carton folder, cam drives) \u2192 P2 economy \u00a0|\u00a0 \u22648 arc-min (infeed belts, case packer) \u2192 standard economy FPG\/FPGA<\/div>\n
    P0 \/ P1 \/ P2<\/div>\n<\/div>\n
    \n
    Q3 \u2014 IP and hygiene?<\/div>\n
    Daily CIP \/ high-pressure hot water washdown \u2192 specify IP65, FAL \/ FAB \/ FAD \/ FADS (all 100% pressure-tested) \u00a0|\u00a0 Splash \/ occasional spray \u2192 IP65 option on FPG \u00a0|\u00a0 Food-grade no external lube required \u2192 FADS P0 with NYOGEL 792D sealed \u00a0|\u00a0 Cold storage (<0\u00b0C) \u2192 confirm NYOGEL 792D grade; min \u221210\u00b0C<\/div>\n
    IP65 \/ NYOGEL<\/div>\n<\/div>\n
    \n
    Q4 \u2014 Cycle rate \/ life?<\/div>\n
    High cycle (>200 cpm, multi-shift continuous) \u2192 30,000 hr series: FAD \/ FADS \/ FAL \u00a0|\u00a0 Medium cycle (60\u2013200 cpm, 1\u20132 shift) \u2192 20,000 hr: FAB \/ FPG sufficient \u00a0|\u00a0 Economy secondary packaging \u2192 FPG\/FPGA 20,000 hr S5 adequate at 1-shift secondary packaging duty<\/div>\n
    30K \/ 20K hr<\/div>\n<\/div>\n
    \n
    Q5 \u2014 Motor system?<\/div>\n
    C1\u2013C10 universal adapter: one qualification covers FAL, FAB, FAD, FADS, FPG\/FPGA on the same machine BOM. Specify your servo motor model and frame size \u2014 Korea Ever-Power will confirm the C-adapter type for each axis in a single response. No re-engineering needed when upgrading from FPG to FAB as machine spec evolves.<\/div>\n
    C1\u2013C10<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n
    \n

    Manufacturing Quality<\/span><\/p>\n

    Korea Ever-Power \u2014 IP65 on Every Unit, Grade-Stamped Backlash, and Food-Grade Lubrication<\/h2>\n

    <\/p>\n

    \n
    \"Korea
    \n\"Korea<\/p>\n

    IP65 pressure test station (every unit, 60-second decay test) and gear-grinding workshop at Korea Ever-Power, Ansan-si, Korea.<\/p>\n<\/div>\n

    Three production quality standards differentiate Korea Ever-Power EP-FAL and EP-FAB from alternative packaging gearbox suppliers \u2014 and all three are directly relevant to the operating environment of food, beverage, and pharmaceutical packaging lines.<\/p>\n

    IP65 on every unit:<\/strong> Packaging machine OEMs and end-users have reported IP seal failures in competitive gearboxes within 3\u20136 months of production washdown operations. The failure mode is predictable: a gearbox that passes a batch-sample IP test but has a marginal seal on the production unit that was not individually tested will allow cleaning agent ingress within the first thermal cycling of the seal material under washdown temperature. Korea Ever-Power’s 60-second pneumatic pressure decay test on every EP-FAL, EP-FAB, EP-FAD, and EP-FADS unit identifies marginal seals before they ship \u2014 not after they fail in the field.<\/p>\n

    Individual backlash grade stamping:<\/strong> Packaging machine acceptance tests typically include a jaw registration or station-to-station accuracy check. When a machine fails this test after installation, the engineer needs to know whether the gearbox’s actual backlash is within the specified grade. With batch-sample testing, the answer is “probably, based on the sample” \u2014 which does not satisfy a machine acceptance protocol. With Korea Ever-Power’s per-unit stamping, the answer is “yes, this specific unit measured X arc-min at 2% rated torque on this date” \u2014 a directly auditable datum.<\/p>\n

    NYOGEL 792D sealed lifetime fill:<\/strong> In food and pharmaceutical packaging environments, any lubricant that exits the gearbox is a potential product contamination event and a regulatory non-compliance. NYOGEL 792D in EP-FADS, EP-FAB, and EP-FAD is contained in a sealed housing with no external access points. There is no scheduled relubrication event that could result in accidental grease discharge onto a product contact surface.<\/p>\n

    <\/p>\n

    \n
    \u2705<\/div>\n
    \n
    Three Tests on Every EP-FAL \/ EP-FAB Unit \u2014 Not Batch Sampling<\/div>\n
    (1) Backlash measurement:<\/strong> Loaded at 2% rated torque; measured grade stamped on nameplate. (2) IP65 pressure decay:<\/strong> 60-second pneumatic test on all dynamic seal interfaces; pass required before packing. (3) Noise and vibration:<\/strong> Closed-loop servo dynamometer test; units above noise threshold are regraded or rejected. These three tests apply to every unit, on every production shift, regardless of order size \u2014 1 unit or 500 units receives the same testing standard.<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    <\/p>\n

    <\/div>\n

    EP-FAL vs. European Premium \u2014 Packaging Application Technical Comparison<\/h3>\n
    \n\n\n\n\n\n\n\n\n\n\n\n
    Attribute<\/th>\nEuropean Premium
    \n(Apex, Neugart)<\/th>\n    		Korea Ever-Power
    \nEP-FAL \/ EP-FAB \/ EP-FAD<\/th>\n    		Korea Ever-Power
    \nEP-FPG \/ EP-FPGA<\/th>\n<\/tr>\n<\/thead>\n
    Integrated belt pulley<\/td>\nSome models (premium)<\/td>\n\u2605<\/span> Standard item (FAL\/FALR)<\/td>\nN\/A<\/td>\n<\/tr>\n
    IP65 per-unit test<\/td>\nSample test<\/td>\n\u2713<\/span> Every unit tested<\/td>\nIP64 (every unit)<\/td>\n<\/tr>\n
    Backlash grade stamp<\/td>\n\u2713<\/span> Per unit<\/td>\n\u2713<\/span> Per unit (every unit)<\/td>\nBatch sample<\/td>\n<\/tr>\n
    NYOGEL 792D sealed<\/td>\n\u2713<\/span> Standard<\/td>\n\u2713<\/span> FAL\/FAB\/FAD\/FADS<\/td>\nCASTROL LMX<\/td>\n<\/tr>\n
    Gear accuracy<\/td>\n\u2713<\/span> DIN Class 5<\/td>\n\u2713<\/span> DIN Class 5 (5-axis CNC)<\/td>\nDIN Class 6\u20137<\/td>\n<\/tr>\n
    C1\u2013C10 universal adapter<\/td>\nBrand-specific only<\/td>\n\u2713<\/span> All 8 series<\/td>\n\u2713<\/span> All 8 series<\/td>\n<\/tr>\n
    Unit price (P1)<\/td>\n100% benchmark<\/td>\n\u2605<\/span> ~60\u201375%<\/td>\n\u2605<\/span> ~35\u201350%<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    Comparative data based on publicly available specifications and customer substitution tests conducted by Korean packaging machine OEMs. Korea Ever-Power does not sell counterfeit products and does not claim to manufacture identical products to named European brands.<\/p>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n
    \n

    \uace0\uac1d \ud53c\ub4dc\ubc31<\/span><\/p>\n

    What Packaging Machine Engineers Say About EP-FAL and EP-FAB<\/h2>\n
    \n
    \n
    \u2605\u2605\u2605\u2605\u2605<\/div>\n

    “We had a persistent jaw registration problem on our 600-cycle FFS machine \u2014 a periodic \u00b10.09 mm error at belt rotation frequency that our servo tuning could not fully compensate. Switched to EP-FAL with the integrated pulley. The periodic error dropped to \u00b10.015 mm on the first machine. We haven’t touched the servo parameters since. The customer’s seal integrity test went from 94% pass to 99.7%. EP-FAL solved a problem we’d been fighting with separate-hub designs for three years.”<\/p>\n

    \n
    SB<\/div>\n
    \n
    Shin B., Lead Mechanical Engineer<\/div>\n
    Form-Fill-Seal Machine Manufacturer \u2014 Busan, Korea<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \u2605\u2605\u2605\u2605\u2605<\/div>\n

    “Our rotary filling machine uses EP-FADS P0 on the nozzle axes. The food-grade requirement was non-negotiable \u2014 the customer specified sealed lifetime lubrication, no external grease points, and IP65 on a 24\/7 CIP washdown line. EP-FADS checked all three boxes. The direct-insert motor mounting also eliminated the adapter-plate contamination trap we’d had on a previous design \u2014 no crevices for product residue around the gearbox input end. The P0 grade stamp went directly into our CE documentation without any additional test data.”<\/p>\n

    \n
    OJ<\/div>\n
    \n
    Oh J., Principal Design Engineer<\/div>\n
    Liquid Filling Machine OEM \u2014 Incheon, Korea<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \u2605\u2605\u2605\u2605\u2605<\/div>\n

    “We build a 12-station indexing carousel for cosmetic packaging. Station repeatability spec is \u00b10.02 mm at 150 mm carousel radius \u2014 which requires \u22641 arc-min backlash after our servo compensation. EP-FAB P0 with the per-unit backlash stamp gave us documented traceability for each machine’s qualification record. After switching from a European brand, the unit cost saving was 32%. The C1\u2013C10 adapter covered our Mitsubishi servo motors without any engineering change \u2014 same adapter we use on the economy FPG drives on the same machine’s infeed conveyor.”<\/p>\n

    \n
    KM<\/div>\n
    \n
    Kang M., Senior Automation Engineer<\/div>\n
    Cosmetic Packaging Machine Builder \u2014 Seoul, Korea<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n
    \n

    <\/p>\n

    Related EP-Series \u2014 Full Packaging Line Coverage<\/h3>\n
    \n
    \"Korea<\/div>\n

    The core packaging series are EP-FAL<\/a> (inline belt-pulley jaw and conveyor drives) and EP-FALR<\/a> (right-angle belt-pulley for corner-drive layouts). For precision indexing and rotary tables: EP-FAB P0<\/a>. For food-grade filling nozzle axes: EP-FADS P0<\/a>. For high-speed film draws and labellers: EP-FAD P1<\/a>. For economy secondary packaging drives: EP-FPG\/FPGA<\/a>.<\/p>\n

    Browse the full EP series range<\/a> or explore related mechanical drive components at cvjointdriveshaft.com<\/a>. For comparison with worm reducer alternatives in secondary packaging: worm-reducers.xyz<\/a>.<\/p>\n<\/div>\n

    <\/p>\n

    Frequently Asked Questions \u2014 Packaging Machine Gearbox Selection<\/h3>\n
    \nWhy does the FFS jaw drive need an integrated belt pulley rather than a standard gearbox plus hub?\uff0b<\/span><\/summary>\n
    The jaw drive problem is not backlash \u2014 it is hub eccentricity. In a conventional gearbox-plus-hub setup, the belt pulley is a separate component that mounts onto the output shaft via a keyway or clamp. The manufacturing tolerance between the hub bore and the output shaft diameter (typically h6\/H7 = 0\u201325 \u00b5m clearance, plus keyway angular offset) produces a concentricity error of 0.03\u20130.12 mm. This eccentricity appears at the jaw as a periodic position deviation at belt rotation frequency \u2014 in a 600-cycle-per-minute jaw drive running a 100 mm pitch-diameter pulley at 1,500 rpm, the error repeats 1,500 times per minute, which the servo controller processes as a disturbance it must compensate at every cycle. EP-FAL eliminates the hub-shaft interface entirely: the pulley groove is machined on the same forging as the output shaft, sharing the same centreline. Documented result from a direct substitution in a 600-cycle FFS machine: periodic registration error reduced from \u00b10.09 mm to \u00b10.015 mm. The servo parameters did not require re-tuning.<\/div>\n<\/details>\n
    \nWhat does “IP65 on every unit” mean in practice for a packaging line?\uff0b<\/span><\/summary>\n
    IP65 certification means the gearbox is sealed against dust ingress and against water jets from any direction at up to 12.5 litres per minute. The critical word in Korea Ever-Power’s quality standard is “every unit” \u2014 not “batch sample” or “AQL sampling plan.” Every EP-FAL, EP-FAB, EP-FAD, and EP-FADS unit leaving the Ansan-si production facility has passed a 60-second pneumatic pressure decay test on all dynamic seal interfaces (input shaft seal, output shaft seal, housing joint seals). A unit that shows any pressure decay above the threshold is rejected and does not ship. In practical terms for a packaging OEM: the probability that a gearbox in your production line has a marginal IP seal that passes the batch-sample inspection standard but fails on the first CIP washdown cycle is eliminated by design \u2014 it cannot pass the production line test. This matters most for food and pharmaceutical lines where a gearbox IP failure is a potential contamination event rather than just a maintenance call.<\/div>\n<\/details>\n
    \nIs NYOGEL 792D in EP-FADS suitable for direct food-contact applications?\uff0b<\/span><\/summary>\n
    NYOGEL 792D is a synthetic hydrocarbon grease contained within the sealed EP-FADS housing with no external access points. It is not an H1 food-grade lubricant under the NSF registration system \u2014 it is not formulated for incidental food contact. However, because it is sealed within the gearbox housing and there are no external grease nipples, grease ports, or relubrication events, the probability of lubricant contact with the product stream is by design near zero under normal operating conditions. For applications where the gearbox is located within a product contact zone and regulatory compliance requires H1 or H2 lubricant certification, consult Korea Ever-Power application engineering to confirm whether an H1-certified grease substitution is available for your specific frame size and operating temperature. Contact sales@planetary-gearboxes.cn with your application details and required certifications.<\/div>\n<\/details>\n
    \nCan EP-FAL handle the full AT10 belt tension at 600 cycles per minute without external support?\uff0b<\/span><\/summary>\n
    Yes, within the rated frame sizes. EP-FAL specifies a maximum radial force of 34,200 N at the rated overhang distance for the relevant frame sizes (FAL110 through FAL280). This rating includes the dynamic belt tension component from the jaw acceleration-deceleration profile at 600 cycles per minute. An AT10 belt of standard width for a 090\u2013150 mm frame jaw drive generates a peak belt tension well within this envelope at rated machine speed. The output bearing in EP-FAL is oversized relative to the standard EP-FAB output bearing \u2014 it is specified as part of the FAL design specifically to carry the sustained radial belt load without lifetime reduction. For non-standard belt configurations (extra-wide AT10, multi-strand AT5, or operating beyond the rated overhang distance), contact Korea Ever-Power application engineering with your belt specification, jaw mass, and cycle rate \u2014 a bearing life calculation can be provided as part of the application engineering review.<\/div>\n<\/details>\n
    \nHow does the C1\u2013C10 motor adapter simplify a packaging machine BOM with multiple gearbox series?\uff0b<\/span><\/summary>\n
    A typical high-speed packaging machine may have four or five different gearbox series on the BOM \u2014 EP-FAL for the jaw drive, EP-FAB P0 for the rotary indexer, EP-FADS for the filling nozzle, EP-FAD for the film draw roller, and EP-FPG for the infeed conveyor. With a conventional gearbox supplier, each series would require a separate motor adapter qualification: different adapter ring geometries, different torque specifications, different installation procedures. With Korea Ever-Power C1\u2013C10, the adapter ring geometry for a given servo motor model is identical across all eight series. The same C7 adapter (for example) that you qualify for your Yaskawa SGMJV-04A motor on the EP-FAL jaw drive installs unchanged on the EP-FADS filling axis and the EP-FPG conveyor drive. One qualification documentation package covers the entire motor-gearbox interface for the full BOM. When the machine specification changes and EP-FPG is upgraded to EP-FAB on a particular axis, the motor adapter does not change \u2014 only the gearbox body changes.<\/div>\n<\/details>\n

    <\/p>\n

    \n
    Specify EP-FAL, EP-FAB, or EP-FADS for Your Packaging Machine<\/div>\n
    Send your drive point list with motor model, cycle rate, and IP requirement \u2014 Korea Ever-Power will provide a full series and frame-size recommendation for every axis within 24 hours. One C-adapter qualification covers the complete BOM.<\/div>\n

    Request Packaging Gearbox Specification \u2192<\/a><\/p>\n<\/div>\n<\/div>\n<\/div>\n

    \ud3b8\uc9d1\uc790: Cxm<\/p>","protected":false},"excerpt":{"rendered":"

    600 cycles\/min FFS Jaw Drive Rating IP65 Every Unit Pressure-Tested \u00b10.01\u00b0 Index Accuracy \u2014 EP-FAB P0 34.2 kN Belt Radial Force \u2014 EP-FAL \u221210\u00b0C Min. Operating Temp \u2014 NYOGEL C1\u2013C10 Universal Motor Adapter Engineering Context Why Packaging Machinery Spans the Entire Gearbox Precision Spectrum \u2014 From Food-Grade P0 to Economy P2 Korea Ever-Power EP-FAL integrated […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[19],"tags":[],"class_list":["post-168","post","type-post","status-publish","format-standard","hentry","category-application-and-technical-guid"],"_links":{"self":[{"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/posts\/168","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/comments?post=168"}],"version-history":[{"count":2,"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/posts\/168\/revisions"}],"predecessor-version":[{"id":171,"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/posts\/168\/revisions\/171"}],"wp:attachment":[{"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/media?parent=168"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/categories?post=168"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/planetary-gearboxes.cn\/ko\/wp-json\/wp\/v2\/tags?post=168"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}